Alloy 800

This alloy resists hydrogen/hydrogen sulphide corrosion and chloride-ion stress corrosion cracking. It has excellent high temperature strength and immunity to ‘sigma’ phase formation. It is used for pigtails and headers and hydrocarbon ‘cracker’ tubes, for sheathing for heating elements, in nuclear engineering and for other high-temperature processing equipment.

Alloy 904 L

Enlarge {+}

A nickel iron cobalt alloy combining a law coefficient of expansion and higher inflexion temperature with higher strength than is usual in this composition range. It is being evaluated for such applications as diesel engine piston crowns, compensating members in gas turbine engines and controlled clearance rotating machinery parts.

Nickel 200

Enlarge {+}

Commercially pure wrought nickel for the construction of chemical plant.

Alloy 825

Enlarge {+}

This product resists corrosion and chloride-ion stress corrosion cracking. It has resistant to stress corrosion cracking and pitting and used for chemical plant and pickling plant.

Alloy 625

Enlarge {+}

An alloy with high strength and toughness from cryogenic temperatures to 1100ºC. In addition to good oxidation resistance it resists attack by other media and is virtually immune to chlorideion stress corrosion cracking, it is used in aerospace and is being evaluated for chemical and marine Engineering.

Alloy 600

Enlarge {+}

This alloy has excellent mechanical properties and oxidation-resistence at high temperatures. It is used for furnace parts, heat-treatment equipment, heating element sheating, in nuclear engineering and in the construction of chemical plant.

Cast Monel alloys

Enlarge {+}

Cast alloy pig supplied for foundry addition of silicon. For corrosion-resistance castings.

Monel Alloy K 500

An alloy with similar corrosion-resistance to MONEL alloy 400 but amenable to precipitation hardening to give high strength. Used for propeller and pump shafts, bolts, doctor blades and valve spindles.

Monel Alloy 400

Enlarge {+}

A General engineering alloy with good resistance to corrosion by sea water, sulphuric hydrochloric and phosphoric acids, pharmaceutical products, ammonium sulphate, fatty acids etc. it retains its strength and toughness up to about 450ºC and is used for chemical, steam and petroleum plant, marine and pickling equipment.

Nickel 270

Enlarge {+}

A high-purity nickel with a minimum temperature-coeffecient of resistance of 0.006/ºC over the range 0-100ºC. Made by the powder metallurgy process. Used for components of special valves such as hydrogen thyratons and for electric resistance thermometers and controls.

Alloy DS

Enlarge {+}

A general purpose heat resisting alloy with particular resistance to carburisation and alternating carburisation and oxidation. It is used for furnace parts, heat treatment and vitreous enameling equipment.

Nickel 201

Enlarge {+}

A low carbon grade of nickel free from the stress- corrosion cracking associated with graphitisation in chemical plant operating at temperatures above 300ºC, e.g. caustic soda plant.

Nickel 203

Enlarge {+}

A high-purity nickel for anodes, plants and grids of electronic valves and for magnetostrictive transducers.

Nickel 212

Enlarge {+}

Slightly stiffer than pure nickel used forelectrode support wires in radio valves and tungsten filament lamps.

MONEL & K - MONEL BALLS

Enlarge {+}

A cathode nickel for the sleeves of indirectly heated, oxide-coated cathodes in radio valves.